-Grey transparent outer casing made from high impact and UV resistant polycarbonate.
-Karabiner on top meets requirements of AS 1891.5:2020> 6kN gate strength plus swivel attachment point
-Dual stainless steel rollers built into casing to reduce friction on webbing and unnecessary fraying against outer casing
-ANSI aluminum Double Action Snap Hook
-Comes with built in energy absorber with protective cover.
-Allows workers to use in horizontal and foot level anchorage applications.
-Swivel attachment point on top on SRL.
-Reduces impact forces to less than 6kN.
-Rated for up to 140kg worker
-Retractable webbing maximum length: 2m
-Full service not required - refer to user instructions
-Breaking Strength: 20kN (Min)
-Certified to standard EN 360:2002
-Accepted under AS/NZS 1891.3:2020 refer table 1. Acceptance of systems conforming to international standards
-Karabiner on top meets requirements of AS 1891.5:2020> 6kN gate strength plus swivel attachment point
-Dual stainless steel rollers built into casing to reduce friction on webbing and unnecessary fraying against outer casing
-ANSI aluminum Double Action Snap Hook
-Comes with built in energy absorber with protective cover.
-Allows workers to use in horizontal and foot level anchorage applications.
-Swivel attachment point on top on SRL.
-Reduces impact forces to less than 6kN.
-Rated for up to 140kg worker
-Retractable webbing maximum length: 2m
-Full service not required - refer to user instructions
-Breaking Strength: 20kN (Min)
-Certified to standard EN 360:2002
-Accepted under AS/NZS 1891.3:2020 refer table 1. Acceptance of systems conforming to international standards
- Conforms to standard EN 360:2002.
- Accepted under clause AS/NZS 1891.3 S1.6
- Accepted under clause AS/NZS 1891.3 S1.6
