- 250gsm blend – 87.5% FR cotton, 11.5% Poly Amide, 1% Anti-static
- Airflow rear vertical venting panels provides extra air flow around the body
- Dual plans/notepad pockets on chest with velcro flap closure
- Left hand chest pocket with velcro smartphone pocket & pen partition
- Velcro adjustment on sleeve cuffs
- Radio communications loop on right chest
- YKK vislon zip with protection placket and Velcro closure at top
- All critical stress points bartacked for strength
- Twin stitched retro-reflective FR tape
- Split side seam with velcro closure for flexibility
- Airflow rear vertical venting panels provides extra air flow around the body
- Dual plans/notepad pockets on chest with velcro flap closure
- Left hand chest pocket with velcro smartphone pocket & pen partition
- Velcro adjustment on sleeve cuffs
- Radio communications loop on right chest
- YKK vislon zip with protection placket and Velcro closure at top
- All critical stress points bartacked for strength
- Twin stitched retro-reflective FR tape
- Split side seam with velcro closure for flexibility
- Fabric & reflective tape certified to: AS/NZS 1906.4.2010
- Design complies with: AS/NZS 4602.1:2011 High Visibility Safety Garments & Amendment No. 1: Nov 2016
- Design certified to: CoPTTM-TTMC-W17
- Complies to Ultraviolet Protection Factor AS/NZS 4399
- Electrical Arc flash protection 11.0 cal/cm². ATPV+ exceeds the 8 cal/cm2 arc rating requirements for HRC2 (PPE2). Fabric tested according to the standard ASTM F1959/F1959M-12, Determination of the Arc rating (ATPV) of flame resistant material clothing.
- Tested & certified to EN1149-3: 2004 Method 2. Antistatic - Induction Charging
- Tested & certified EN ISO 11612:2015 A1, A2, B1, C1, Protective Clothing - Clothing to protect against heat and flame.
- Design complies with: AS/NZS 4602.1:2011 High Visibility Safety Garments & Amendment No. 1: Nov 2016
- Design certified to: CoPTTM-TTMC-W17
- Complies to Ultraviolet Protection Factor AS/NZS 4399
- Electrical Arc flash protection 11.0 cal/cm². ATPV+ exceeds the 8 cal/cm2 arc rating requirements for HRC2 (PPE2). Fabric tested according to the standard ASTM F1959/F1959M-12, Determination of the Arc rating (ATPV) of flame resistant material clothing.
- Tested & certified to EN1149-3: 2004 Method 2. Antistatic - Induction Charging
- Tested & certified EN ISO 11612:2015 A1, A2, B1, C1, Protective Clothing - Clothing to protect against heat and flame.
